| |
|
Speed Interface™, Model 2A ( Regular Speed )
|
| |
|
This is a computer board and a directional microwave transceiver packaged
in a convenient enclosure. It is engineered to interface with your products and
to process raw Doppler signals generated by the microwave transceiver. Effective
speed range is 5 - 200 MPH (or equivalent).
The program diskette and the Flash memory design enables you to
customize your own "speedometer".
|
|
Standard package includes… |
|
- Computer / antenna unit in an enclosure
- 77.6 MPH test fork
- Operator’s manual
- Certification
- RS232 communication format
- 24-inch power / serial communication cable with a DB9 connector (DB9
connector carries both power and data)
- "Y" shaped power / serial communication extension cable with a
10-foot power cable section terminated with bare wires and a 10-foot
serial communication cable section terminated with a DB9 connector
- Cardboard packing box
- One-year full warranty
|
 |
|
Factory default settings:
- Sensitivity set on 17 for maximum distance range
- Units of measure set on MPH (miles per hour)
- Speed range set on 5 - 200 MPH (miles per hour)
- Application filter is set for road traffic
- Data output rate set on continuous
- Data output format set to standard ASCII characters (hundreds, tens,
ones, carriage return)
- Directionality set on approaching targets
- Cosine (angular) error corrections set on 0°
degree error
- Single target tracking set to track target’s speed continuously
- Multiple target tracking set to select target with the strongest
return signal
|
|
For More Information
Contact Us |
